To power on the Beam, press and hold the power button for 3 seconds. Once the Beam is powered on, the right light will remain solid until you press and holding the button for 3 seconds again to turn the Beam off.
Approximately 45 seconds after the Beam has been powered on the middle white light will blink several times to indicate that the Wi-Fi is active. You can connect to it by using your Wi-Fi preferences on your device.
Testing the Beam battery charge level. When you quickly press the power button without holding it down, the right light will turn on for about 3 seconds. This indicates the battery charge level. Green shows a 90% or greater charge. Yellow means 10–90% charge and Red, about 10% or less charge.